Results 1 to 3 of 3
  1. #1
    C64 addict Staff Moderator
    My location

    Demon Cleaner's Avatar
    Join Date
    Dec 2002
    Location
    Phobos
    Posts
    7,664
    Downloads
    7
    Uploads
    88

    WinUAE 3.4.0 Betas

    Beta 3 & 4:

    A new beta version of the Amiga emulator WinUAE 3.4.0 is available for testing.

    Beta 4 vom 31.08.2016:
    - Fixed uaegfx 8-bit mode palette updates.
    - Added A2630 v4 to ROM scanner. (v2, v3 and v5 to go)
    - Force UAE mapping mode if 1G Z3 Chip RAM size.
    - Do not map Z3 RAM (and crash) if RAM allocation fails.
    - Improved some "Too much RAM" edge cases when deciding UAE/REAL mode and if JIT direct supported.
    - cpuboard_settings config entry wasn't loaded correctly if it had any multiselect options.
    - Added IVS Vector accelerator board emulation.
    - Added support for accelerator 68000 mode fallback, IVS Vector has different boot menu logo in 68000 mode (It is not possible to boot directly in 68000 mode, IVS Vector boot code needs to initialize first in 68030 before menu in 68000 mode will work)
    - Blizzard 1230/1260/2060 68EC020 fallback mode supported. Hard reset restores original CPU configuration. Very pointless but IVS Vector support code already handles it.
    - Stop PPC emulation first, before freeing any emulation resources to prevent random crashes at exit.
    - Added some predefined autoconfig RAM board choices. Few popular options copypasted from amiga.resource.cx. More later..

    Beta 3 vom 28.8.2016:
    - PCI ES1370 fixed.
    - (Missed from b1 log): CPU Idle logic has been completely changed, now it only has two states, inactive and active. Active state changes internal CPU speed state to approximate and active equals fastest possible mode. Old logic was never good enough. CPU usage was never low enough and it didn't prevent audio glitches.
    - Another b1 missed log entry: conditional register breakpoints, break when any CPU register matches (equals, smaller, larger, range). More information in debugger help.
    - Do not use new CPU Idle mode in PPC-only configs.
    - Low latency vsync really fixed. Can also fix other CPU usage related problems in other modes.
    - Hardware info panel up/down button disable logic improved.- Bitplane DMA overrun 1 cycle adjustment, now it matches real A1200 100%. Possible Disk/Audio/Sprite DMA slot conflicts are not yet emulated. (Causes graphics glitches on real hardware)
    - uaegfx vblank interrupt hang fixed.- Network OSD led was invisible.

  2. #2
    C64 addict Staff Moderator
    My location

    Demon Cleaner's Avatar
    Join Date
    Dec 2002
    Location
    Phobos
    Posts
    7,664
    Downloads
    7
    Uploads
    88
    Beta 17:

    Beta 17:

    - Allow non-power of 2 manually configurable memory size, in 64k blocks. (Unsupported with JIT)
    - If possible bitplane overrun situation is active, skip BPLCON0 non-delayed modification optimization. (Massive / Skarla)
    - Do not steal focus from tree view GUI panel when moving selection up or down using keyboard.
    - Switching from 32-bit to 24-bit address space CPU with Z3 UAEGFX: Mode was changed to Z2 without validating old size.
    - Some Z2 fast mem only configs crashed at startup.
    - American Laser Games arcade hardware emulation. ROMs added to ROM scanner, LD drive is also emulated. LaserDisc emulation uses recently added genlock video emulation to play the video. (Games will run without video but it also makes them completely unplayble..). NVRAM load/save support. ALG input events added to Input panel. (Pointless genlock video was useful after all!)
    - Genlock video file sound track is also supported but it is only played in ALG LD emulator mode.
    - Genlock image/video is now always scaled to screen, previous limited integer only scaling is gone.
    - Added genlock keep aspect option.
    - Picasso IV and x86 VGA ROM file was cleared when loaded. (b12)
    - Updated to Visual Studio 2017 RC

    American Laser Games configuration:
    - Standard A500, KS 1.3, ECS Agnus. Extended ROM = game ROM selection.
    - Genlock ALG mode, with video path pointing to LaserDisc video file.
    - Input config: Lightpen (do not configure mouse in Amiga mouse port), ALG Right Trigger = fire. Service = service menu. Right Start and Right Coin needed to start the game and use service menu. Mad Dog McCree also needs Right Holster (reload). Player 2 is not fully supported.

    ALG discussion: http://eab.abime.net/showthread.php?t=84888

  3. #3
    C64 addict Staff Moderator
    My location

    Demon Cleaner's Avatar
    Join Date
    Dec 2002
    Location
    Phobos
    Posts
    7,664
    Downloads
    7
    Uploads
    88
    Beta 18: (RC1, ~mid december final release date)

    - Input device on the fly change support now ignores all non-input device change events.
    - On the fly switching from keyboard connected to disconnected did nothing.
    - Added MIDI out and Genlock video volume setting to Sound panel volume drop down menu.

    Beta 19 (RC2):

    - Some WASAPI buffer size + frequency combinations caused immediate hang at startup.
    - Reset confused display vertical positioning in some situations (Incorrectly detected it as "fake" 60Hz-like hack).
    - Some adjustments to GUI panel tree view and main view tab order.

Similar Threads

  1. WinUAE 2.8.1 Betas
    By Demon Cleaner in forum WinUAE
    Replies: 1
    Last Post: 10th June 2014, 12:21
  2. WinUAE 2.7.1 Betas
    By Demon Cleaner in forum WinUAE
    Replies: 10
    Last Post: 25th April 2014, 07:38
  3. WinUAE 2.7.0 Betas
    By Demon Cleaner in forum WinUAE
    Replies: 12
    Last Post: 1st December 2013, 13:21
  4. WinUAE 2.6.0 Betas
    By Demon Cleaner in forum WinUAE
    Replies: 13
    Last Post: 13th May 2013, 08:39
  5. WinUAE 2.5.1 Betas
    By Demon Cleaner in forum WinUAE
    Replies: 1
    Last Post: 20th December 2012, 08:13

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Copyright classicamiga.com