My broadband!!! WOOO!

**AlexJ** · 14th April 2007, 12:56

Have you set your network connection to select an IP address & DNS server automatically:

Have you tried pressing the repair button? (Always worth a try!)

**Submeg** · 14th April 2007, 12:57

Yea have done all that, it says that it can't accquire an IP address (when I do repair) and I have the router set to dynamic IP

**AlexJ** · 14th April 2007, 13:00

Originally Posted by Harrison

And on the PC check your network settings. Go into the Local Area Connection Properties, and then look at the Properties for the Internet Protocol (TCP/IP) entry. Under the general tab select "Obtain an IP address automatically".

Originally Posted by AlexJ

Have you set your network connection to select an IP address & DNS server automatically

I swear that wasn't there when I posted my reply!

Anyway, try removing all saved information about the wireless network (Wireless Networks tab on the Wireless Network Connection Properties window, and remove all saved networks from the list.)

Have you got any kind of encryption enabled? Might be worth disabling it if you have while you get it working...