Quote Originally Posted by Harrison View Post
The USB stick needs to be in the Gotek drive when you turn the Amiga on, or it won't boot the selector list and set the Gotek's memory slots up with the selected ADFs. This is why it can't access it when you try to insert the USB stick after booting into Windows.

An alternative could be to include a blank adf file on the USB stick and have this selected when you reset the Amiga, then the Amiga should see the disk as blank and boot from your HDD. Once booted you can then move between the ADFs you have already setup in your selector slots on the ADF and they will appear in Workbench as if you were removing and inserting different disks.

I hope that helps? And welcome to Classicamiga.
Cool beans I will give it a go!

Sent by homing missile from my HTC one M8