Finaly, i completed the project.
Space inside the case was the major problem. Everything else compared with Space problem was easy.
Closing the original A1200 case with keyrah inside and a pc laptop board was ...... Hell ...
I did it, but everything was to compress inside.
I should get an ribbon cable extention so that i could put the Keyrah in a more confortable position.
anyway, it's done.
My soldering skills are not the best, but i was able to do the job.

so in resume:
- Original Amiga 1200 case
- Laptop Mother Board (Pee Cee)
- Keyrah adaptor with original A1200 keyboad
- USBs
- Sound RCAs
- DB9 Ports (with Keyrah)
- Power on/off plug
- Power on/off button (connected to m. board slot)
- F12 button for Winuae (connected to m. board slot)
- HD 2,5" sata (with extention cable)

The HD 2,5" sata (with extention cable) is not very stable, don't know why. 1 in 10 boots fail to detect Hd
without the extention cable wokrs fine

https://picasaweb.google.com/1025638...eat=directlink


Feel free to comment some pictures in picasa (i would apreciate)

And, i know, that a lot of you will say "WHY? Why did you do such a project"
- Because i had some spare parts... and because i like to create... and... to have an dedicaded emulation machine