Connecting Amiga to PC LCD with this device, capture video with no pc

[Tiago]

Yes Harrison, that's it.
i know Indivisons are great, but if you have other Retro Stuff, it gets expensive... i would love to have one, but i also haev Atari ST, and i am thinking og getting other systems. So i would prefer a more balance output, that i can use with other machines.

[Harrison]

Me too! I'm still searching for a good solution for this. At the moment I have each device connected via SCART to a SCART switcher box, so I can get a proper RGB signal to the TV, and the image quality is pretty good. But it doesn't look as good on an LCD TV as it does on a CRT, and I would also like to be able to setup my retro systems with an LCD monitor to make it a more compact setup.

[Tiago]

that switcher box you have, is it digital or analogic? I had one analogic it was basicly a physical switch, it worked, but i made a bit of phantom image.
the digital one i know they work quite good, but does you switch gives the same image as directly connected to the tv?

[Harrison]

I've owned the switch I used for quite a few years. It is a manual switch, which are generally better than digital switches and the manual control normally isolates the channel better. I don't get any ghosting with the switch and it looks as good as connecting directly to the TV. I've no idea on the make or model as it doesn't say, but I bought it from a home cinema specialist store years ago and it was quite expensive at the time. The scarts connecting it to the TV were also quite expensive at the time, made by IXOS with heavy shielding and gold plating.

I have found a scart to VGA converter but it is very expensive for what it is.

http://www.maplin.co.uk/module.aspx?...C=SO&U=Strat15

[Harrison]

Another idea is HDMI. Most new monitors are now having an HDMI port included, and I think over time most consumer computers are going to clowly move over to HDMI as the display cable of choice. A lot of graphics cards now also have HDMI ouput on them so you can connect directly, and with HDMI you can transfer the audio as well, so a monitor with sound will only need a single cable for both.

Anyway... there are some upscale converters that exist which convert RGB scart to HDMI. They seem expensive though, but would be a cool solution. Look at this one for an idea.

http://cgi.ebay.co.uk/CM393-CENTAUR-...item1bfe47b57b

[Tiago]

looks very nice, but more then 200 pounds .... :-(
i wounder what it deals with the low frequencies of miggy