Hi all,
Was going through this with Harisson on his CF thread but thought I better start a new one as I didn't want to hijack his thread.
I have an issue setting up my SCSI CD drive Here goes,
I am having problems getting the drive connected. Digging around I think I may have found the issue but i'm not sure. The CD0 file that I double click confirms that it is already mounted (this wasn't in the DEVS\DOSDrivers folder so it must be starting another way). I understand I need to edit this so I have the correct name and SCSI ID that the unit is configured to. However the name is what is causing me issues. This reads,
xxxx.device
My question is do I need a specific .device file to use with the CD-ROM drive? By default this is setup as scsi.device but I have no scsi.device in the DEVS\DOSDrivers folder. There dosen't seem to be anything related to CD drives either e.g. cdrom.device. I have a PCMCIA card which does have a compactflash.device file so I am assuming I do need a .device file for the CD_ROM drive. Does this sound correct? If so do you know where I can get one? I have checked Aminet but there dosen't appear to be anything there. There is nothing with the Blizzard SCSI driver that I can see. Checked the Phase5 web site and there dosen't seem to be anything there either
Any help would be appreciated
Thanks