How to install SCSI v43.45p under AmigaOS 3.9?

[Harrison]

I had a dig around for you and discovered that the Extractmodule tool is included in PatchRAM.lha archive on Aminet.

I hope that helps.

However, someone else warns against using Extractmodule as it is difficult to use, and instead recommends using romupdatesplit, which is a part of the Blizkick archive. As it extracts the modules just for your specific Amiga model and automatically gives them the right names.

Let me know if it works.

[Phantom]

Thanks mate. I will give it a try.

[Phantom]

It seems that I've patched the new version of scsi.device successfully. It shows 43.45 with a version check on CLI, so I think so far so good.

Problem still applies with HDToolBox however. It can see around 185GB for the HD, but cannot create the second partition larger than 6.1GB!

I have to change the HD values methinks. Thomas told me to do with the FixHDDSize tool on Aminet. Tonight I will give it a try.

[Phantom]

Hooray!!! It worked. Now I can use all the capacity of my hard disk drive. Great.

[Harrison]

That is great news.

Now... how are you going to fill a 200GB Amiga HDD? I've yet to manage to fill a 40GB one! And I've installed everything I can think of on there.

In fact, before WHDLoad I didn't manage to fill a 1.3GB drive!

[woody.cool]

That is great news.

Now... how are you going to fill a 200GB Amiga HDD? I've yet to manage to fill a 40GB one! And I've installed everything I can think of on there.

In fact, before WHDLoad I didn't manage to fill a 1.3GB drive!

Seconded!
My A3000 has a 30GB drive in it, and it's only about 4GB full

[Harrison]

You can fill your 30GB drive more than that though woody!

I've managed to fill about 24GB with all of the game and demo WHDLoad files using the KGWHD packs.