My A1200 black project

[J T]

I do like that. Is there anything you can do about the flap of the floppy drive?

[Harrison]

There isn't a flap on Amiga internal drives so that picture is just showing the internals of the drive.

[Phantom]

There isn't a flap on Amiga internal drives so that picture is just showing the internals of the drive.

Exactly. Thanks.

[J T]

Ohhh.... yeah. I'd forgotten that. Been a long time since I looked at my amiga. Still, a shame it can't be made a little less conspicuous.

[PanTheMan]

looks very nice black is better

[Puni/Void]

Good job on that Amiga 1200, Phantom. Looks awesome. Would love to try this on my 1200. Do you have any tips for spraycan-newbie?

[Harrison]

For the best result on spray painting, apply very thin layers, let each dry for 3 hours before applying the next.

And for the best finish you could go further and use a very fine wet and dry sand paper. Apply 3 coats of paint, waiting between each, then leave for 24 hours to harden. Then lightly wet sand the paint to remove any spray imperfections, and apply another final coat. Repeat as needed. If you wanted a shiny gloss finish you could then use a clear car paint lacquer as the final top coat.