That's great to know, that you got it working again.

I guess the project is back on! If you had to remove a stick of ram, it sounds like a bad stick but it could be a config issue also. You can test each ram stick with memtest+ http://www.memtest.org/

Your board probably supports dual channel mem, so have a read about mem configs for you motherboard: http://www.nvidia.com/object/designe...50i_ultra.html

Sometimes you have to play aound with the settings in the bios to get two sticks stable in dual channel, or run them in single channel mode (they will run about 5% slower; not much difference in real world apps between dual and single channel).

Good luck with your Arcade build!