Results 1 to 10 of 13

Hybrid View

  1. #1
    Burn! Hot Blooded Rhythm Soul! Staff Moderator
    My location

    J T's Avatar
    Join Date
    Jan 2003
    Location
    'STRAYA (since 2010)
    Posts
    2,006
    Downloads
    1
    Uploads
    0

    A8n-e noisy northbridge fan replacement.

    I believe Teho has (or had) an Asus A8 motherboard. Mine has the noisy little fan and I'm planning to replace it with a Zalman heatsink thingy.

    Is it easy to do? Anyone here done it?

  2. #2
    C64 addict Staff Moderator
    My location

    Demon Cleaner's Avatar
    Join Date
    Dec 2002
    Location
    Phobos
    Posts
    7,457
    Downloads
    7
    Uploads
    88
    I only changed the fan on my gfx card with a Zalman. That was very easy. If you're going to change the CPU fan, make sure there's enough room in your case, as the Zalman fans are very big.

  3. #3
    Burn! Hot Blooded Rhythm Soul! Staff Moderator
    My location

    J T's Avatar
    Join Date
    Jan 2003
    Location
    'STRAYA (since 2010)
    Posts
    2,006
    Downloads
    1
    Uploads
    0
    Just finished, and despite a few hairy moments everything seems to be running well, so far so good.

    When I put the PC together I'd screwed the motherboard in too tightly and so some of the stand-off came out when I was unscrewing to remover the mobo earlier. This lead to stress and a screwdriver touching the board a few times but luckily not too forcefully

    The fan was quite hard to pull off and made crunching noised which wasn't too reassuring, and the brackets for the zalman heatsink were tiny and fiddly.

    Hope I applied the paste right, tried to make it a thin even smear.

    It's WAY quiter now. I'm happy it's done and I don't appear to have ****ed anything up.

  4. #4
    Burn! Hot Blooded Rhythm Soul! Staff Moderator
    My location

    J T's Avatar
    Join Date
    Jan 2003
    Location
    'STRAYA (since 2010)
    Posts
    2,006
    Downloads
    1
    Uploads
    0
    Nadgers!

    No sound coming out of the onboard sound gubbins (tried speakers and headphones). All appears to be working properly as far as windows is concerned. Not sure what caused this, other than not connecting the front-of-case-mounted jacks which I never used anyway. Couldn't be that, could it?

  5. #5
    Wiseguy Staff Moderator
    My location

    Teho's Avatar
    Join Date
    Dec 2002
    Location
    Norway
    Posts
    1,273
    Downloads
    1
    Uploads
    0
    That's right, I have the A8N-E board as well. And I've also replaced that fan for a heatsink (the chip fan, right?), about half a year ago. Not because it was noisy though, but because it stopped working at all. I didn't have any problems doing it, allthough you're right about assembling the heatsink brackets being damn fiddly. And only having a half right thumb didn't make it any easier! Mostly I don't notice but there are times when I miss that fingertip, and that was definitely one of those times!

    Everything turned out fine for me though, didn't get that issue with the sound you're talking about. No idea what could've caused it either, sorry.

  6. #6
    Burn! Hot Blooded Rhythm Soul! Staff Moderator
    My location

    J T's Avatar
    Join Date
    Jan 2003
    Location
    'STRAYA (since 2010)
    Posts
    2,006
    Downloads
    1
    Uploads
    0
    Quote Originally Posted by Teho View Post
    the chip fan, right
    Yeah, the little tiny fan fixed on to the mobo.

    Quote Originally Posted by J T View Post
    Nadgers!

    No sound coming out of the onboard sound gubbins (tried speakers and headphones). All appears to be working properly as far as windows is concerned. Not sure what caused this, other than not connecting the front-of-case-mounted jacks which I never used anyway. Couldn't be that, could it?
    Turns out, it could and indeed was. The signal is sent out to the front jacks and then returned to the rear jack (that is fixed to the motherboard). Jumpers would have done the trick more easily than the fiddly wires but I don't have any.

    All working now, and I have learnt something today

Similar Threads

  1. Noisy Linkstation
    By Harrison in forum PC - Windows, Linux, Mac
    Replies: 5
    Last Post: 4th June 2009, 16:09
  2. Oldskool Uk plan Amibench replacement
    By Merlin in forum Amiga
    Replies: 21
    Last Post: 5th December 2007, 20:47

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Copyright classicamiga.com