Just in case here are the two disks. (Use as disk 4 when either installing or playing the game.
My location
Just in case here are the two disks. (Use as disk 4 when either installing or playing the game.
Last edited by Harrison; 4th July 2008 at 12:25.
A1200 Power Tower
OS 3.9 / CGX4 / OS4.0
Blizzard 210Mhz (overclocked to 266Mhz) 603e PPC with 25Mhz 040 (Overclocked to 33Mhz) 256Mb RAM
ZIV
CV64/3D
3.2Gb HDD + 20GB HDD
My location
Great !!!
A500 - A600 - A1200
My location
Buleste:
I did just like you said, i install disks 1, 2, 3 from original sysndicate and american revolt as disk4. All went ok.
When i start the game, it runs as normal syndicate, so to play the new missions do i must play all the normal missions? Can't i go directly to the new ones?
A500 - A600 - A1200
My location
You have to clear Europe and Asia to get to America and that is when you should get to the new missions. Be warned they are very very very difficult. I advise using "Marks Team".
A1200 Power Tower
OS 3.9 / CGX4 / OS4.0
Blizzard 210Mhz (overclocked to 266Mhz) 603e PPC with 25Mhz 040 (Overclocked to 33Mhz) 256Mb RAM
ZIV
CV64/3D
3.2Gb HDD + 20GB HDD
My location
I can now confirm that Code MAck and American Revolt are the same thing. I played standard syndicate till i'd conquered all but the Americas. I then did a seperate install of American Revolt and Code Mack and transfered the save game to them and the missions on CM and AR are the same. Code Mack was probably an early name for American Revolt.
A1200 Power Tower
OS 3.9 / CGX4 / OS4.0
Blizzard 210Mhz (overclocked to 266Mhz) 603e PPC with 25Mhz 040 (Overclocked to 33Mhz) 256Mb RAM
ZIV
CV64/3D
3.2Gb HDD + 20GB HDD
My location
Thanks for the info Buleste
A500 - A600 - A1200
My location
Thanks for finding this information out. I will update the main site entries tonight to reflect this.
If you haven't played a classic game in years, it's never too late to start!