@JLPedro

Thats pretty awesome !!!

hmmm fabricating the back and front...

well the back I would use stiff cardboard and mark out all that i need on the rear, size etc... and then once you have that (including cut outs) you have two options...

make it yourself or pop-into a engineering workshop and see if they would do if for a bit of dinero

Personally i would have it made from 15 to 20 guage steel, as its relatively robust and around 2mm thick

However you could use plexi case, but for the level of regidity I would recomend atleast 4mm thick.

as you can see at that thickness it can start swamping the ports, making it difficult to plug stuff in.

--------------------

manufacturing the front, and fabbing stuff.... there is no substitue for style and expoxy putty... and a lot of sanding and filing....

I start by making a regid housing / mounting and look at making ascetic changes after...

use stiff card for getting the shape of pieces, from this cosmetic shapes can be fabricated from 1 to 1.5mm plastic (like CD jewel cases)

I really am looking forward to seeing more of this project

Keep up the good work