Got a A600!!

[JLPedro]

Yey another question, got an A1200/A600 psu that as from my 1rst A1200, decided to test-it, removed it from the case, and its the ones with that brown solid plastic covering the entire case and pcb... so this is what i got from the readings of the multimeter:



Black GRD
White -12v 100mA -> Reads -15,04v / 1,04A
Brown +12v 500mA -> Reads +11,67v / 0,28A
Red +5v 3A -> Reads +5,14v / 4,91A


Is this psu in good condition? -12v reading seems a little high, and on +12v only got 0,28A instead of 0,5A.

Readings from the psu that came with the A600 that was given to me:

+12v -> +11,36v / 0,8A
-12v -> - 8,98v / 1,7A
+05v -> +5,12v / 2,25A


Is this one better? all seems fine except from the -12v that is only reading -8,98v.