WinUAE 1.4.3 public beta #2
And the next beta release.
Quote:
Beta 2: Mostly pointless SCSI stuff here but at least I learned a lot about low level SCSI protocols
- WD33C93 + (Super)DMAC based SCSI HDF emulation. A590/A2091, A3000 and CDTV with SCSI expansion. Current implementation is very minimal. A590/A2091 Boot ROMs 6.0, 6.6 and 7.0 tested and confirmed working. A3000 random KS ROMs (including "1.4") also confirmed working. CDTV with 1.0 extended ROM freezes during standard WB 1.3 startup-sequence (works if run manually..) Newer extended ROMs work without freezes. NOTE: disconnect/reconnect not emulated (yet?), SCSI Message out + Command + Data in/out + Status + Message in phases emulated. Most WD33C93 registers are not emulated. Non-tested drivers (KS versions) most likely won´t work yet. Check the log!
- A3000 KS "1.4" added to ROM list (yes, it is beta but it came with some A3000s) Need confirmed official A3000 and A4000(T) information before more A3000/A4000(T) ROMs will be added. (Note A3000 ROMs, not SuperKickstart images!)
- A590/A2091 6.0, 6.6 and 7.0 added to ROM list. A590/A2091 ROM is automatically selected, manual rom selection is not possible.
- A590/A2091 Guru ROM added to ROM list (not yet supported, I need A590/A2091 autoconfig er_InitDiagVec value first, Scout shows it)
- A4091 40.9 (no CRC available yet) and 40.13 ROM added to ROM list. NCR SCSI (A4091 and A4000T) is not yet emulated.
- Action Cartridge Super IV Professional emulated partially, also added support for Super IV "ROM version" (Super IV cartridge does not have any ROM chips, "ROM" is loaded from disk) Loader disk does not work yet! Interface is very different compared to Action Replay series.
Super IV image in the zone. "Can you upload"-type SCSI boot ROM related questions will be deleted.
