Buleste
21st February 2017, 10:03
I've taken the plunge and decided to try to get a PCB built of the CASDuino/TZXDuino to fit in the same PP9 case that I use for my standard builds.
Piotr Bugaj (Zaxon) designed his own TZXDuino Shield based on our design but without the motor control or a case which is available from here. (http://www.sellmyretro.com/offer/details/22796) So with the help of his design I used Diptrace to design one with the 2.5mm motor control socket and right angle buttons so that it will fit in a case. It's now off at ragworm.eu to get two prototypes made.
I'll keep you updated as to when they come back.
1121
Piotr Bugaj (Zaxon) designed his own TZXDuino Shield based on our design but without the motor control or a case which is available from here. (http://www.sellmyretro.com/offer/details/22796) So with the help of his design I used Diptrace to design one with the 2.5mm motor control socket and right angle buttons so that it will fit in a case. It's now off at ragworm.eu to get two prototypes made.
I'll keep you updated as to when they come back.
1121