PDA

View Full Version : Wanted ATX - Amiga adapter


StuKeith
16th March 2010, 22:02
Been getting some random issues with the 1200, seems to be power related and that the connecter is dropping out sometimes.

Has anyone got an AT to amiga Connection for tower install please?

I sorted the PCM slot issue. Pin1 got bent!
Buleste
17th March 2010, 09:31
I managed to be able to get one from Amigakit a while ago so you should try asking them.
Harrison
17th March 2010, 10:01
Failing that, our member AmigaManiac could make you one. His website is http://www.amigamaniac.com (http://www.amigamaniac.com)
StuKeith
17th March 2010, 17:24
Just to clarafy its AT not ATX Im after/
Buleste
17th March 2010, 17:55
I did have one for the AT but I think I gave it to someone on here. Again ask Amigakit and they may have one. Other than that have a look for a DIY project on the web there has to be at least one.
StuKeith
17th March 2010, 20:54
I did have one for the AT but I think I gave it to someone on here. Again ask Amigakit and they may have one. Other than that have a look for a DIY project on the web there has to be at least one.

Yea think that was me lol! one of the wires is working lose and shorting.
Harrison
18th March 2010, 11:21
Can't you rewire it? Cut the wires back and resolder them into the connector?
StuKeith
18th March 2010, 14:21
Can't you rewire it? Cut the wires back and resolder them into the connector?

Am going to try that. the issue is that the pcb is resined into a case so needs to be broke apart.
Buleste
20th March 2010, 10:43
Just found this (http://www.ianstedman.co.uk/Amiga/amiga_hacks/Amiga_Power_supplies/body_amiga_power_supplies.html#AT_PSU) from good old Ian Steadman if you are feeling like doing a good old hack. This is mostly for ATX PSU's but has info on AT's as well.