JLPedro
5th February 2009, 12:19
The KSRS V1.0 arrived on tuesday, I asked Nathan if He could send an KSRS V1.0 instead of the KSRS V2.0 (as it as some incompatibilities with A600 and KS 1.3).
So on the package i got a KSRS V1.0 Unique competition version:
http://ubsbyg.blu.livefilestore.com/y1pkvdSwvBOduwEVOgTtJ2Mr-NJEpxcZP9PxHB1WyFTsEoL10kxWpkO2E3XcZLtl5ZWC9Vy8qrhAhc/KSRS%20V1.0.JPG
Note the colored ribon unique in this piece! :thumbs:
This is my A600 motherboard revision:
http://ubsbyg.blu.livefilestore.com/y1p6pTFYFgTUHOuFI1ZJupdIxrTBVv5CgrcR_xZN8FSF8ua7DX3qA6O06_ai3f7JVdcCN4rMCxsX98/A600%20Rev2D.JPG
And here is the KSRS V1.0 mounted with KS 3.1 and KS 2.05 (KS 1.3 will arrive soon), with the CF HD Card (256MB):
http://ubsbyg.blu.livefilestore.com/y1pkvdSwvBOduxy7cjlU4-cyTJyx8_hOSDlzigNqdchpO6K-GOxIOb3HTfjeK8Ze6dmY5HIW_t1EEU/KSRS%20V1.0%20Fitted.JPG
Note: This A600 Case already have the hole to pass the switch so no damage done.
The use off the switch is easy, just power down the amiga and move the switch, then power on the machine again and kickstart changed.
So the specifications of this Amiga 600 are : MB Rev2D, 2MB Chip Ram, 2MB Fast Ram PCMCIA, 256MB CF HD, 170w Miniatx PSU, and now KS 1.3 and 3.1. Running the wonderfull ClassicWB 68k with WHDLoad Registed! :acclaim:
Thanks Nathan for sutch fine work, and this site for the opurtunity to win this prize! Thanks!
So on the package i got a KSRS V1.0 Unique competition version:
http://ubsbyg.blu.livefilestore.com/y1pkvdSwvBOduwEVOgTtJ2Mr-NJEpxcZP9PxHB1WyFTsEoL10kxWpkO2E3XcZLtl5ZWC9Vy8qrhAhc/KSRS%20V1.0.JPG
Note the colored ribon unique in this piece! :thumbs:
This is my A600 motherboard revision:
http://ubsbyg.blu.livefilestore.com/y1p6pTFYFgTUHOuFI1ZJupdIxrTBVv5CgrcR_xZN8FSF8ua7DX3qA6O06_ai3f7JVdcCN4rMCxsX98/A600%20Rev2D.JPG
And here is the KSRS V1.0 mounted with KS 3.1 and KS 2.05 (KS 1.3 will arrive soon), with the CF HD Card (256MB):
http://ubsbyg.blu.livefilestore.com/y1pkvdSwvBOduxy7cjlU4-cyTJyx8_hOSDlzigNqdchpO6K-GOxIOb3HTfjeK8Ze6dmY5HIW_t1EEU/KSRS%20V1.0%20Fitted.JPG
Note: This A600 Case already have the hole to pass the switch so no damage done.
The use off the switch is easy, just power down the amiga and move the switch, then power on the machine again and kickstart changed.
So the specifications of this Amiga 600 are : MB Rev2D, 2MB Chip Ram, 2MB Fast Ram PCMCIA, 256MB CF HD, 170w Miniatx PSU, and now KS 1.3 and 3.1. Running the wonderfull ClassicWB 68k with WHDLoad Registed! :acclaim:
Thanks Nathan for sutch fine work, and this site for the opurtunity to win this prize! Thanks!