Tiago
30th July 2008, 19:04
I did a convertion from RGGL (cd-rom output 4 wires) to RCAs.
Usually the RGGL goes to a pc sound-blaster, but i change the cable and convertto RCA so i can plug directly to a stereo divice...
The questino is:
- each RCA (left and right) has 2 connections, inside and outside, so there 2x2=4
- the RGGL has 4 wires, so i read that you grab the rggl left cable and put in in the red inside rca (right), then the next wire, closest to the right one in the red outside rca, then the 3 wire in the rggl in the black inside rca and the 4 in the outside black rca.
4 to 4 right? wrong!
when i connect to my stereo he mix the channels,so it only works if i remove 1 wire from one rca, exemple: if i remove the red outside it works, but if not it will shup up the oposite speaker.... kind a strange...
Normal stereos use 2 wires for each speak (hoofer and twiter) (is that it in english?)
so he only accept 3 wires ..... Can anyone give a clue?
Usually the RGGL goes to a pc sound-blaster, but i change the cable and convertto RCA so i can plug directly to a stereo divice...
The questino is:
- each RCA (left and right) has 2 connections, inside and outside, so there 2x2=4
- the RGGL has 4 wires, so i read that you grab the rggl left cable and put in in the red inside rca (right), then the next wire, closest to the right one in the red outside rca, then the 3 wire in the rggl in the black inside rca and the 4 in the outside black rca.
4 to 4 right? wrong!
when i connect to my stereo he mix the channels,so it only works if i remove 1 wire from one rca, exemple: if i remove the red outside it works, but if not it will shup up the oposite speaker.... kind a strange...
Normal stereos use 2 wires for each speak (hoofer and twiter) (is that it in english?)
so he only accept 3 wires ..... Can anyone give a clue?